For accurate wear and tear records, the degree of wear of the liner can be learned without stopping. For the first set of liner, the following requirements should be recorded.
1, when the crusher is adjusted, the screw can be swinging inward, so that it depends on adjusting the cap flange, slightly adjusting the cap in a certain direction, aligning the hole on the locking screw and the hole on the adjusting cap flange, and fixing the locking screw to the adjustment cap method orchid with the nut and the dish spring.
2, adjust the position of a certain position pin to indicate the initial locking position. Move the hole on the flange to the next hole of the locking screw, then adjust the sleeve to enter the new locking position and adjust it in the vertical direction.
3, during normal operation, the use of the first set of liner should be accurately record accurate digital lock position. Record the locking position, until the lining board scrapped so far. Since there will be no breaking two identical, with liner type, thickness and casting tolerance range is large, it is not possible to predict a lining board can after a locking position in the scrap.
4, if the liner is worn out and decided to be scrapped, the position of the sealing ring of the cap should be adjusted with paint and a horizontal short line before adjusting the sleeve to prepare the unloading liner.
5, the installation of new liner was also insist on doing the locking position records are compared, we can determine the degree of wear of lining plate, each adjustment (reduction) of a discharge port, the adjusting sleeve funnel move downward at a time. When the liner close to the wear limit, painted on the funnel mark will be set to adjust show. Because any two sets of wear liners are not the same, after a few sets of lining plate, we can determine the average position is quite accurate.
Click and check the conical crusher parts
Hunan Fengwei Wear Parts Foundry, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, Metso, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.
Hunan Fengwei Wear Parts Foundry has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Hunan Fengwei Wear Parts Foundry product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.
Hunan Fengwei Wear Parts Foundry wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization
Contact:Sales Director: Eileen Cai ;
Email: sales@hnfwe.com;
Mobile telephone: +8618692872223