First, the use of double toothed roller crusher

After the double toothed roller crusher is put into use, in order to ensure the safe operation and make full use of its best performance, it must be regularly maintained according to the requirements and form a system

1, the crusher must be started without load

2, check the connection of the gear plate every day, do not allow loosening or losing at work. Check the temperature of the bearing regularly. It is not allowed to work at higher than 120 degrees centigrade. When the temperature is higher than 80 degrees, you should check the bearings and other parts

3, the degree of tooth wear is inspected once a day, when the serious wear and tear, should be complete replacement, to ensure that the broken tooth roller shaft running balance

4, regularly check the reducer’s oil temperature, oil level and oil pollution, the reducer oil temperature should be less than 90 degrees, and found that the oil temperature is too high, the oil level is too low and oily serious pollution, should be timely inspection, oiling or oil

5, in a timely manner to the hydraulic coupler after injection spray and replacement of the fusible plug.

6, regular inspection of insulation and wiring head connection, cable damage must be replaced; wiring head loose, must be re tightened

7, avoid foreign objects into the crusher

8 all operations and inspections shall comply with the requirements of the safety regulations issued by the safety management of coal

Two, check every shift

1, check whether the operation of the broken shaft group is normal and the degree of wear of the broken teeth

2, check whether the motor belt drive is running properly

3, check the gear reducer for oil leakage, whether there is any abnormal sound and vibration, the oil temperature in the box shall not exceed 90 degrees, and whether the oil level is insufficient

4, eliminate the reducer and the connection cover sundry, in order to heat dissipation

5 check all hydraulic hoses and hoses for damage and leakage

6 check all cables for reliability and wear or damage

7, check whether the crusher has obvious faults or problems

click to see the double roller crusher parts

Three, daily inspection

1 repeat the inspection items per shift

2, check whether the connecting bolts of the transmission are firm and reliable

3 ensure that no material is piled up

Four, check weekly

1 repeat daily inspection items

2, check whether the driving parts of the double toothed roller crusher are safe and reliable, whether or not there is any damage. Check the fasteners, loosen them, and replace the damaged ones

Five, monthly check

1 repeat the weekly inspection items

Six, check every half year

1, release all the reducer oil, clean the inside and replace the new oil

2, at any time, reducer and crushing shaft group can not be taken apart in the pit repair, in case of emergency, we must open the pit repair, we must have dust-proof, anti foreign objects and other protective measures to ensure safe use

Seven, check every face

1 check whether the crusher is damaged or worn

2, check if the reducer needs to be overhauled

3, check if the motor needs to be overhauled

4, check whether the broken tooth has enough life to complete the new surface broken

High manganese steel roller crusher accessories, good toughness, good manufacturability, low price, which is mainly characterized in that a larger impact or contact stress under the action of surface layer, rapid hardening, the hardening index of 5 to 7 times higher than other materials, wear resistance is greatly improved in Hunan Fengwei Wear Parts Foundry casting roller crusher accessories , chemical stability, reasonable heat treatment process, good abrasion resistance, high strength, quality assurance, welcome friends to come to consult the industry talk.

Contact:Sales Director: Eileen Cai ;

Email: sales@hnfwe.com;

WhatsApp: +8618692872223