Hunan Fengwei Wear Parts Foundry is dedicated to all kinds of crusher wear resistant materials. Today we will talk about Metso HP400 lubrication hydraulic assembly steps
Connect the lubricating oil pump to the connecting housing
Connect connector to pump shaft
The rubber seal is arranged in the connecting housing
Drop the pump / connecting housing assembly through the holes in the plate
Secure the oil pump / connecting housing assembly to the plate with a bolt
The magnetic tube is fixed on the pump suction part
Position the motor vertically and place the motor shaft in the connector
The motor is fixed on the connecting casing
Place the rubber seal under the filter so that it passes down the hole of the press plate
Fix the filter on the pressure plate
Connect the pump outlet to the filter inlet with hoses and fittings
Lower oil level gauge and secure oil level gauge and seal on the pressure plate
Screw the air cleaner on the air pipe
Fix the one-way valve at the outlet of the lubricating oil filter. The arrow shows the installation direction
click to see the cone crusher parts introduction
Hunan Fengwei Wear Parts Foundry covers an area of more than 20 thousand square meters, and has a plurality of sand mold and EPC process production line, equipped with advanced laboratory and quality inspection equipment, with an annual output of more than 1 tons of wear-resistant parts enterprises always adhere to the wear-resistant casting production and research direction, according to the characteristics of various working conditions of crushing and grinding equipment and materials of its own, with high-quality raw materials, make the product toughness and wear degree reached 1.2 to 1.5 times that of similar products. Hunan Fengwei Wear Parts Foundry wearable parts can be customized to map, if there is no map, after the company has professional surveying and mapping personnel to help you customize the mapping.
Contact:Sales Director: Eileen Cai ;
Email: sales@hnfwe.com;
WhatsApp: +8618692872223