Daily driving program
The crusher start before the start of lubrication system and make sure the oil tubing in the back of at least 170C first, such as parking during the oil temperature is lower than 170C, should use the immersion heater heating oil. The oil temperature is lower than 250, do not start the crusher.
The crusher before starting the lubricating oil must be at least 2 minutes cycle, that oil in the oil return pipe from the discharge of oil flow to full half pipe. Start must first check the return pipe return quantity before crushing, if the oil return pipe without oil discharge, crusher operated for more than 15 seconds is not allowed.
The hydraulic station must start in the crusher before the operation. Check button lights control box, confirm the hydraulic station already in operation and system pressure is normal.
The start of crusher and empty load operation for about 5 minutes, check and record the crusher idle current.
In the low feeding conditions to start feeding crusher, and gradually increase the feeding amount reached the maximum power level.
Daily parking program
Stop the crusher feed, and in the absence of state material crusher continue to run for 2-3 minutes.
Stop the crusher and let it down to stop running, check the crusher parking inertia, the minimum deceleration time is about 65 seconds. Every time when parking should record the parking inertia time.
The 10 minutes after stopping the lubricating oil pump (in the extreme cold environment, heating or circulatory system to continue operation).
Stop the hydraulic device.
Note: crusher not stop under load. If you want to stop, first, cut off the crusher material supply, and then stop the crusher, 10 minutes after stopping the lubricating oil pump.
Introduction of cone crusher parts
Hunan Fengwei Wear Parts Foundry, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, Metso, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.
Hunan Fengwei Wear Parts Foundry has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Hunan Fengwei Wear Parts Foundry product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.
Hunan Fengwei Wear Parts Foundry wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization
Contact:Sales Director: Eileen Cai ;
Email: sales@hnfwe.com;
Mobile telephone: +8618692872223