One,A crusher parts production and operation of the preparatory work before the inspection of the bearing in whether the amount of the lubricating oil; if there is a proper clearance between the rotor and the check plate, especially after the new ring hammer; check nut shell plate round the waist on both sides is solid and reliable; check the broken cavity no foreign body, and clean up the broken cavity; artificial turning 2 ~ 3 rpm, ensure no jamming phenomenon.
Two, counterattack crusher start, first according to the requirements to start the signal, and then start the motor
Three, crusher running back breaking time of 1-2min after the normal operation, can feed production. Feeding should be continuous, uniform, must be distributed in the length of the working part of the rotor, the motor to prevent the sudden increase of load; non iron and other materials can not be broken into the machine, in order to prevent damage to the equipment and accidents; back breaking operation, the staff can not stand on the rotor inertia force line, and prohibit any cleaning, adjustment, inspection, in order to avoid danger; bearing the maximum temperature of over 70 DEG C, such as more than 70 DEG C, should stop immediately, find out the reason, properly handle normal, only according to the Program driving
Four, crusher parking first stop feeding; stop feeding, let the crusher to keep running, until it will be left in the crushing cavity material treatment is completed; crusher parking, for discharging conveyor material feeding after stop discharging conveyor.
Five, adjust the gap between the rotor and the plate crushing clearance between the rotor and the sieve plate (usually slightly greater than the discharging accuracy), can be adjusted according to need. Regulation should be carried out in the parking. The adjustment, first loosen the nuts round the waist plate on both sides of the lower casing (four), and then rotate the worm adjust the well adjusted, loosen the nut.
Hunan Fengwei Wear Parts Foundry, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, Metso, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.
Click to view the impact crusher parts introduction
Hunan Fengwei Wear Parts Foundry has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Hunan Fengwei Wear Parts Foundry product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.
Hunan Fengwei Wear Parts Foundry wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization
Contact:Sales Director: Eileen Cai ;
Email: sales@hnfwe.com;
Mobile telephone: +8618692872223