CS75, CS160, CS240, CS400 four types of cone crusher around the spring. A considerable number of insurance can not be met in the crusher broken material (such as iron), insurance spring makes the crusher can be slightly raised to will not be broken. Usually the material discharge spring does not need disassembly and installation but users. For individual cases need to be removed and then install the spring, it should be according to the following method. The spring shaft bracket is arranged above the two kinds of methods: eccentric type and central type.
Different forms have different removal and installation. The eccentric type, are on both sides of shaft bracket on an eccentric spring group. The center, is just above the shaft bracket in only one center type spring group. After the installation of a set of spring, spring should be in another group of the relative installation the position in this way can guarantee the support sleeve balance is not fresh. Don’t lower or raise a set of spring with 20 tons of jack up and down CS400 gravity, or raise a set of spring with 40 tons of Jack gravity. At the time of installation should pay attention to the gasket pad under the jack should be. Keep flat, frame and Jack Around the chain or wire rope entangled in order to put the jack in place, because the jack slipping will cause serious personal accident
Introduction of cone crusher parts
Hunan Fengwei Wear Parts Foundry, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, Metso, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.
Hunan Fengwei Wear Parts Foundry has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Hunan Fengwei Wear Parts Foundry product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.
Hunan Fengwei Wear Parts Foundry wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization
Contact:Sales Director: Eileen Cai ;
Email: sales@hnfwe.com;
Mobile telephone: +8618692872223