Troubleshooting:
One, abnormal vibration
Reason：
1, the material is too large;
2, uneven wear of plate hammer;
3, the rotor is unbalanced;
4, improper handling of the foundation
Removal method:
1, you can check the feed size;
2, replace the counterattack hammer;
3, adjust the rotor;
4 check the anchor bolts and reinforce them
Two, the discharge is too large
Cause: too much wear due to excessive wear of lining plate or plate hammer
Elimination method: by adjusting the clearance of the back and forth counter or replacing the lining plate and the plate hammer
Three, knocking is produced inside the machine
Reason：
1,Material that cannot be broken is entered inside the machine;
2,The lining plate is loose and the hammer strikes on the lining board;
3,The hammer or other part of the plate breaks
Troubleshooting: check the fuselage, remove foreign objects, fasten the lining board or replace parts
Four, the bearing temperature is too high
Reason：
1,Excessive or insufficient grease;
2,Grease dirt;
3,Bearing damage
Removal method:
1,Check grease for proper amount;
2,Replace grease after cleaning bearings;
3,Replace the bearings
Click to see the impact crusher parts introduced
Hunan Fengwei Wear Parts Foundry impact crusher parts, chemical composition of stable, reasonable heat treatment process, good wear resistance, high strength, quality assurance, welcome friends from the industry come to consult
Contact:Sales Director: Eileen Cai ;
Email: sales@hnfwe.com;
WhatsApp: +8618692872223